T
Toxic_Chem
Guest
Paasche talon airbrush tg2l
Compressor badger tc910 aspire pro
Compressor badger tc910 aspire pro
If you want some input on this please also post what you want to use it for. There have been some more posts about starting equipment have a look at those as there is a lot of information there
Do you know any other reliable suppliers with he badger 105 in stock , for a reasonable price? And thank you for your response
Yes I've tried both but they're msrp, I'm in Tennessee in the us, I've seen one at active powersports no idea if they're legitimate or not
Thank you man! Great advise, there are currently no bigger compressors in my price range unfortunately, I will of course upgrade in the near future, as of right now I'll be mainly practicing and getting into the hobby as a whole, I've found one for about 265 with a 6gallon tank, I need it to be quiet for now until I buy my new house (fiancé will cut my throat with the airbrush if not) thank you for your response! And I can't wait to start airbrushing bikes, always been a dream of mineDon't know anything about that compressor, but a couple of thoughts. I read a review saying it kicks in every 3 -5 mins at 20 psi, so I would assume that spraying anything at higher psi would cause it to refill quicker, as it's oiless it's possible that may cause overheating. As a rule i spray at 20psi or less, (I do bikes, so similar to what you intend), but some spray at higher than that as their usual psi. And occasionally due to conditions or paint used, or effect wanted, I go higher, and like to go higher to clean the gun. Also you would have to be meticulous about emptying any water from the tank as that will obviously leave less room for air meaning it will empty and refill quicker, and risk overheating. It sounds good apart from that, nice and quiet etc, but if they have one with a slightly bigger tank I would go for that, it may suit you just as it is, but I would want a bit of wriggle room.