.3mm needle for HP-B+
- Thread starter amrogers3
- Start date
Airbrush Dreams
Air-Valve Autobot!
Check coast airbrush supply and see if there is a conversion for the B.
Sent from my iPhone using Tapatalk
http://fredaw61.wixsite.com/the-artist
Sent from my iPhone using Tapatalk
http://fredaw61.wixsite.com/the-artist
You only need to change the nozzle as far as I believe, I had a side feed version of your HP-B+ which I bought from another member on here that came with a 0.3 nozzle already fitted, contact @Lion-Art who is a member here who will be able to advise you further, you can PM him or visit his website.
Airbrush Dreams
Air-Valve Autobot!
According to the parts list on Coast Airbrush supply it is not possible to convert the B to a .3mm needle nozzle. As I look at my C which is a .3mm and the B which is a .2mm set up the body size is larger on the C so the nozzle doesn't fit. The needle on the C is a longer taper which makes the head also longer. You won't get proper atomization of the paint because of the airflow inside the head coming out around the nozzle which will cause back pressure in the brush. Now the Micron is a different story.
Sent from my iPhone using Tapatalk
http://fredaw61.wixsite.com/the-artist
Sent from my iPhone using Tapatalk
http://fredaw61.wixsite.com/the-artist
Squishy
Queen Clown Slayer
I don't know, ( not much help 
) however I know when you change size on the eclipse you also have to buy a different head. So if there's a .3 head that fits on the body, then should be possible, if not then probably not. But as I say, I don't know for sure. Some parts are interchangeable, and some suppliers list which brushes they will fit, but probs best to speak to someone to see if its do-able.
) however I know when you change size on the eclipse you also have to buy a different head. So if there's a .3 head that fits on the body, then should be possible, if not then probably not. But as I say, I don't know for sure. Some parts are interchangeable, and some suppliers list which brushes they will fit, but probs best to speak to someone to see if its do-able.I don't know, ( not much help
We are not talking about the eclipse, he's referring to the HP-B+ and the one I got from @Melbee had a 0.3 nozzle already on with no other parts changed.
Squishy
Queen Clown Slayer
I know that Malky you silly banana,I'm just saying that on the eclipse you also need to change the head, so thought it possible that may also be the case here.
I've seen both heads on the eclipse and they look the same until you hold them side by side, and wondered if that was possible with your hb-p, but if melbee just swapped the needle and nozzle, seems like an easy switch.
I'm just saying that on the eclipse you also need to change the head, so thought it possible that may also be the case here. I've seen both heads on the eclipse and they look the same until you hold them side by side, and wondered if that was possible with your hb-p, but if melbee just swapped the needle and nozzle, seems like an easy switch.
I know that Malky you silly banana,
I've seen both heads on the eclipse and they look the same until you hold them side by side, and wondered if that was possible with your hb-p, but if melbee just swapped the needle and nozzle, seems like an easy switch.
She didn't swap the needle, only the nozzle
