N
Neural
Guest
I admit it. I got impatient. the color coat hadn't been given enough time to cure (only 2hours) when I went to apply a clear coat. One of my stencil lines got blurred because of it, etc.
The reason I'm putting this here though is that I want to verify that what I *think* happened is actually what happened. I don't want to assume that it is just impatience that turned up this result.
If I understand correctly, the bubbles/spotting are due to an interaction between the clear coat and the color because the color wasn't cured. There is also a very faint orange peel texture that may not be visible in the image.
So.. is that assessment accurate, or is there perhaps something else that I missed?
Notes: Media used: enamel based
Canvas: Aluminum (cleaned with soap/water, wiped with alcohol, then allowed to dry completely (I didn't get impatient there)).
The reason I'm putting this here though is that I want to verify that what I *think* happened is actually what happened. I don't want to assume that it is just impatience that turned up this result.
If I understand correctly, the bubbles/spotting are due to an interaction between the clear coat and the color because the color wasn't cured. There is also a very faint orange peel texture that may not be visible in the image.
So.. is that assessment accurate, or is there perhaps something else that I missed?
Notes: Media used: enamel based
Canvas: Aluminum (cleaned with soap/water, wiped with alcohol, then allowed to dry completely (I didn't get impatient there)).