6mm push fit on compressor?

[Smucker]

Hi, I'm looking at a Titan compressor which comes with a 6mm push fit connector.

http://www.pillertons.co.uk/Titan22L.html#simple3

Does anyone know what adaptors I'll need to get this to a 1/8 iwata hose? Ive googled them but they appear to all be female connections (though I might be seeing it wrong).

Also, am I right in thinking that 6mm is the same as 1/4 inch? I know it's a couple of mm off but do they fit like for like?

Thanks

 

[RebelAir]

Prob what ya want....although never really used those kind of fittings so may be wrong..Then just get a male to male 3/8 BSP Nipple if you need the compressor end male..

http://www.ebay.com.au/itm/BSP-Fema...er-etc-/131718598823?var=&hash=item645f337f85

Don't try to mix metric and BSP...

http://www.ebay.com.au/itm/3-8-Nipp...881067?hash=item3d09d3ceeb:g:P9wAAOSwnipWU9Nj

 

[Smucker]

Prob what ya want....although never really used those kind of fittings so may be wrong..Then just get a male to male 3/8 BSP Nipple if you need the compressor end male..

http://www.ebay.com.au/itm/BSP-Fema...er-etc-/131718598823?var=&hash=item645f337f85

Don't try to mix metric and BSP...

http://www.ebay.com.au/itm/3-8-Nipp...881067?hash=item3d09d3ceeb:g:P9wAAOSwnipWU9Nj

Brill! Thanks, that's the part I'm looking for

 

[RebelAir]

You should be able to get the nipple at any decent hardware m8...But the push adaptor may be a bit harder to track down at local sources..Good luck.