Motorcycle tank prep

Diegojavbau

Air-Valve Autobot!
I will let the base black paint , but I need to remove the labels that lays under the clear coat and give grip to the clear , without damage in the base paint.
Beside patience , what do you recommend ? 600 or 800 grit ?

Any advice from experience is very welcome
 
If you want high quality the all proces should be build from grout to top. The paint should be take off to the metal, at least all sandet to the flat surface and primering. If you are not able to do that take this tank to the paint shop and let them to do all the job, from metal to the prapering top coat to be ready for artwork. If you thing about you costumer seriously dont cut the corners and quality will pay back all hard work.
 
If you want high quality the all proces should be build from grout to top. The paint should be take off to the metal, at least all sandet to the flat surface and primering. If you are not able to do that take this tank to the paint shop and let them to do all the job, from metal to the prapering top coat to be ready for artwork. If you thing about you costumer seriously dont cut the corners and quality will pay back all hard work.

There is no budget for that
 
Back
Top