Separate names with a comma.
Want to see more forum, less google ads ? Then register for free
Hi there Alaskajason I quite don't understand what you mean by uptime it runs for 30 seconds of air and then 10 seconds to refill the tank again...
Hi there nightwìsh I also had ADD but stopped when I got my last gun a micron cmc and never looked back no more for me that's it.
Hi there nightwìsh I agree with you hope you enjoy your new gun
Is it worth all the hype?
A friend has a 10 litre tank only tank I have a sparmax tc 620x 2.5 litre tank any chance of connecting it to my compressor with out to many dramas...
Is you needle chucking nut screwed tight and is your needle all the way to the nozzle you should just see it pop out
Gday from melbourne australia
Good stuff there are alot of very clueý experienced folks on this forum that have helped me out you have come to the right place enjoy.
Gday from melbourne Australia what compressor have ya got.
Gday Gregg welcome from melbourne australia
Thanks for that info Jacky I don't have a eclipse I just looked like it could be screwed of
Jacky does the nozzle screw of the brass piece on that section Pascal might want to screw it off to make it easier with the fishing line l have used...
You will not damage the needle at 50 psi try using can you screw of the nozzle from the brass bit looks like you can if so you will be able to get...
Na no damage all good youĺ be right
Just buy a new nozzle for piece of mine.
I'm sure how long you can soak it on nail polish remover just try soaking it in a small container for few minutes then take it out ann using the...
Forgot to mention you can have a look at he eclipse parts diagram look out for seals which are really called o rings hope I haven't confused you.
You can leave them all in the ammonia just take check for the seals first then remove the seals they will probably be black rubber things.
In the middle photo the head cap there may be a black seal were it screws off the other photos don't have a seal as far as I can see there might be...