Separate names with a comma.
Ready to get involved? Register for free and you won't see any google advertising!
Thank you guys very much all of that helped a lot.
ok that's a relief
Both, The fresh paint peeled outside of the tape, but old paint was lifted up along with the tape. I think de-taacking and not letting it cure like...
Okay great!! I didnt de-taack, and I let it cure completely. I just want to make sure it isn't a problem with the durability.
I let it sit for about 20-45 minutes because I wanted to make sure it didn't need anymore coats. would removing it right away help?
It's peeling off with the pinstriping vinyl. I'm also using masking tape, but not for the direct edges. I want to make sure however that even if it's...
I've also noticed that areas with the most buildup are the spots with the most peeling. It's also only along edges where primer is visible.
I'm currently working on a goalie mask and It's starting to chip which is starting to stress me out. I started by sanding, priming, then...
Okay, I'll check it out
Awesome!! very helpful
How do you guys recommend cleaning for momentary clearing of the cone. Many videos I've seen recommend back flowing (making bubbles). Is this the...
I'm using a .35 but generously adding 2-Thin. do you recomend anything else than to add more reducer, I'm using a Neo compressor, so i'm limited on...
Okay, Thank you very much. I'm going to do a deep clean as well as lube the airbrush considering I haven't done one since it came factory built.
I'll definitely try that... Thank you
I'm also as of today using wicked colors on a goalie mask. Unfortunatley it's still happening. I'm going to do a deep clean to rule out a bad clog.