Separate names with a comma.
Ready to get involved? Register for free and you won't see any google advertising!
I agree with H&S has long paint path but the stacked disk needle packing work well and flushing clean enough when properly diluted color.
From this thread
I buy new nozzle but there is still a problem. Then...
I use iwata hp-cs. After cleaning paintcup I dissemble my airbrush. While I pulling trigger, the needle packingscrew set fall out. I'm sure that it's...
I didn’t find anything other than this post.
I use sewing thread clean inside nozzle.
I think if it hasn’t mist and it’s intention. It’s not overspray.
If I intend to do blending. Does it means I do overspray?
There is someone told this area is overspray. I think If I need that area for blending. It’s not overspray but that person confirm it is overspray.
I found that overspray refers to the application of any form of paint, varnish, stain or other non-water-soluble airborne particulate material onto...
I have ver 2 0.4 nozzle and needle. I try it but the old ver is better.
That’s right! I found same problem. My ver 2 needle doesn’t spray as well as old ver.
Thank you very much. I’ll try it.
I’ ll try again.
Today I use arcylic lacquer color for test again. I just press the trigger. Nothing come out. May be I worry too much.
I use lacquer thinner for this test. I put some thinner in the cup. I press trigger point to handle. Nothing happen. I press and pull trigger...
I may know the cause of this problem. I use lacquer paint for model. The first time I tried it. I used spray paint color. (I drill a color can and...
Are your nozzle H&S?
No, I didn’t polish any needles.
I don't think so because trigger delay doesn't happen when i use 0.2 mm needle
Today I try to compare new and old h&s needle again. Both are 0.4 mm. New needle has less cogging but It’s more delay than old. I use same color and...