Aerograph 63A

X

xvwarrior

Guest
Hey guys, Ive got an old devilbiss aerograph 63A, I've not used it for years and to get it running again would need a series of new bits. Does anyone know where I can get such parts in the UK preferably. I currently use Iwata HP-C's and in comparison as I remember they are far superior to the 63A and at that time I was using Rotring Inks. However this could be tainted by experience.
If the parts for the Devilbiss come in too expensive, then that may justify a new Micron? 'maybee' :witless:

Cheers Guys

Ivan
 
I have 3 super 63's and I've managed to get new nozzles needles and even the complete head setups from ebay. Needles are usually about 12 quid for 2 and nozzles are about 6 quid each but i brought 5 with teflon o rings for 25. Have brought both the 0.12 and the 0.65 setups. Will have a look in my favourites to see if they are still available

http://www.ebay.co.uk/itm/GENUINE-A...Crafts_DrawingSupplies_EH&hash=item3f2fe8c034

http://www.ebay.co.uk/itm/GENUINE-A...Crafts_DrawingSupplies_EH&hash=item58ab362c7e

http://www.ebay.co.uk/itm/Aerograph...Crafts_DrawingSupplies_EH&hash=item3f374cf3a5

http://www.ebay.co.uk/itm/Aerograph...Crafts_DrawingSupplies_EH&hash=item3f37779099


Hope this helps..

Lee
 
I have 3 super 63's and I've managed to get new nozzles needles and even the complete head setups from ebay. Needles are usually about 12 quid for 2 and nozzles are about 6 quid each but i brought 5 with teflon o rings for 25. Have brought both the 0.12 and the 0.65 setups. Will have a look in my favourites to see if they are still available

http://www.ebay.co.uk/itm/GENUINE-A...Crafts_DrawingSupplies_EH&hash=item3f2fe8c034

http://www.ebay.co.uk/itm/GENUINE-A...Crafts_DrawingSupplies_EH&hash=item58ab362c7e

http://www.ebay.co.uk/itm/Aerograph...Crafts_DrawingSupplies_EH&hash=item3f374cf3a5

http://www.ebay.co.uk/itm/Aerograph...Crafts_DrawingSupplies_EH&hash=item3f37779099


Hope this helps..

Lee
Many thanks guys, I will have a look and weigh it up, ;-)
 
Back
Top