H&S Infinity 2024 - official contest link

I think I understand the H&S head, but will wait till I actually have one in hand to make sure I am not missing anything.

Wasn't the HP200 Olympos an attempt to make a micron style head with an HP style brush? Only problem was the giant exit bore. I'd imagine it could be soldered closed, and re-drilled to an appropriate size.
Which is what they were trying to do. But in addition to the huge exit hole, you will also have to reduce the diameter of the tube. But even if you take the smallest HP nozzle cup available, you still have to reduce the outlet diameter by a few hundredths of a millimetre. The taper of the exit port would also have to be changed. Maybe then, if are lucky, will get something close to CM.

I installed the tube in a 112A/B nozzle cup as was done in the 200 series. It works better, but falls short to a ‘micron’. I like how the inner tube is implemented in the 222/223, I need to do something similar + reduce the inner diameter of the outlet.
 

Attachments

  • DSC01103.JPG
    DSC01103.JPG
    241.8 KB · Views: 8
  • DSC01104.JPG
    DSC01104.JPG
    240.4 KB · Views: 8
I'm going to go on record to say this'll be the last airbrush I purchase for a long time. Not that it'll be the end-all-be-all necessarily, I just have enough brushes. I need to just get many more miles under them now.
I already screwed this up. 🥲

I'll just say spraygunner was running a 10% off all airbrushes on national airbrush day.... oh man... did I get duped? There's no national airbrush day is there?

ABDAY2024 got me an eclipse takumi for 179!
 
Back
Top