Help with fathers airbrush

[AndreZA]

Well #AndreaZA and #Mr.Micron. The head assembly for the Badger 100,150 and 200, does not fit this old airbrush.

@Jason Nutty, I am very surprised. I would love the see the two heads side by side. I'll buy the head and needle off you. I can pay via Paypal and shipping to New York.

 

[Jason Nutty]

@AndreZA here are four links to my dropbox for you to view the pictures. I tore the airbrush down as far as I could. The last picture is of the unknown brand airbrush and the Badger nozzle/head assembly. The thread on the older one is on the right and is much finer than Badger.

Links to Dropbox Images. Images are really large so you can zoom in and not get fuzzy, to big for Forum.

Dismantled Air Brush: https://www.dropbox.com/s/z6hcf3z4tf78mgo/20150415_191247.jpg?dl=0
Needle Chuck/spring assembly: https://www.dropbox.com/s/wtstcivv8o9bera/20150415_191926.jpg?dl=0
Old AB Nozzle/Head Assembly Dismantled: https://www.dropbox.com/s/oy7p7oh7e9l2g75/20150415_192330.jpg?dl=0
Badger (Left), Old AB (Right) Nozzle/Head Assembly: https://www.dropbox.com/s/y5ds2hmh1ngrsmd/20150415_192625.jpg?dl=0

 

[AndreZA]

Thanks for the pics @Jason Nutty. And I thought Badger's thread was already too fine compared to all the other manufacturers. This one is ridiculously fine. Now I would like to know if it is indeed a Harbor Freight. That they've got 1/8" air valves and more a 105/155 needle and handle setup.

 

[Jason Nutty]

What I found was that it was purchased through an auto parts store.