Needle help with image

[LoveAB]

I have 7needles, and hp-b & hp-c how do i measure the needles? Ov ones 0.2and other 0.3 on the needle pack it says iwata hp-a,b,sb

 

[jord001]

I would say that the 0.2 will have a finer taper on the tip. Can't tell from the picture.

Lee

 

[LoveAB]

Cheers mate ill have a good look at them all

 

[twood]

Use a printers loop or some kind of magnifying glass then you can see the difference. The .2 will be thinner tip and taper.
Hope this helps....

 

[ad fez]

On badgers needles, they have 2 dots at the top of needle for fine and 1 dot for ultra fine....don't think iwata do that though......silly iwata!Can't tell you which is which from your photo but I can tel you they need a good clean and polish...hehe ;0)

 

[WhiteKnight]

The paacshe Talon needles are identified with grooved rings on the back end of the needle one for the finest .25 two for the .38 and three for the .66 the same goes for the tip and air cap , I don't know if Iwata have a similar system to differentiate the parts (it would make things easier).

 

[ulltraz]

the .2 will finer,check with a magnifying glass,you´ll see.

hope this helps!!!

 

[LoveAB]

haha cheers mate ill get on that