The good news is it seems like a straight forward issue of the pressure being a little low and the paint being a little too thick. You should have the problem sorted following the advice here.
Another thing that might be a cause of the spitting is your not keeping your air on as you paint? Remember air on , pull back for paint , paint off, then air off.
If you don't leave the air flowing thru the airbrush after you stop the paint flow you will have some paint left in the tip so the next time you push the trigger down for air you will get drops of paint
(Spitting paint) along with the air!
Hope this helps?
The good news is it seems like a straight forward issue of the pressure being a little low and the paint being a little too thick. You should have the problem sorted following the advice here.
Well, hopefully we have got the issue straightened out. Seems you were actually trying to spray at something like 5psi or less. The only reason it would work at all is because you initially get a small burst at 30 when its set like that. Its always nice to be able to help.
That’s where this group excels, always willing to help and as you’ve found out, the more info we have the better guidance we can provideyou guys are very patient with newbie questions. I really appreciate it. Wish I had discovered you years ago. It was the nice guy at Iwata that I called the recommended this forum.
We all are or have been newbies, so everybody can sympathise. It’s nice to know the forum cane recommended by Iwata though. That’s pretty cool.you guys are very patient with newbie questions. I really appreciate it. Wish I had discovered you years ago. It was the nice guy at Iwata that I called the recommended this forum.
We all are or have been newbies, so everybody can sympathise. It’s nice to know the forum cane recommended by Iwata though. That’s pretty cool.
Sent from my iPhone using Tapatalk
That's awesome! I would love to take a Dru Blair workshop! But that probably can't happen in my lifetime...Dru (airbrush painting guru)Ken (Badger airbrush owner) are also members on here