Primer

B

Blackthorne

Guest
Do i need primer or adhesion promoter on an carbon fiber goaler helmet (with oem paint/clear) ?

I use autoborne sealer, wicked, aa and illustration...

Hok clears

Thanks
 
I would sand the clear with wet and dry p800 or grey fine scotch brite until all the gloss is remove leaving the clear with a mat finish.

Prime with autobourne sealer then airbrush away
 
Wet sand, smooth out, and I personally would use primer, or the Auto Borne sealer. IF your planning on using (vinyl for stenciling), or even automotive masking, I would use adhesive promoter. Bulldog is what I use, works great.
 
Back
Top